Go to homepage
dosieren.net
€0.00

Dispenser digital IG-1500D 0-1 BAR

Skip image gallery
Digitales rotes Dosiergerät IG-1500D mit Zubehör bestehende aus Fußpedal, 30cc Kartuschen mit Kolben, standard Dosiernadeln, konischen Dosiernadeln, Kartuschenständer, Fingerschalter
Ansicht von schräg oben des roten Dosiergerätes IG-1500D mit Manometer, Druckregler, Zeitanzeige, Zeiteinstellungsblock, Vakuumregler, Schnellanschlussbuchse, Hauptschalter
Vorderseite des roten Dosiergerätes IG-1500D mit Manometer, Druckregler, Zeitanzeige, Zeiteinstellungsblock, Vakuumregler, Schnellanschlussbuchse, Hauptschalter
Rückseite des Dosiergerätes IG-1500D mit Luftauslass, Drucklufteingang, Fußpedalanschluss, Netzbuchse, Farbe rot
Rotes Dosiergerät IG-1500D mit Fußschalter und Fingerschalter
Digitales rotes Dosiergerät IG-1500D mit Zubehör bestehende aus Fußpedal, 30cc Kartuschen mit Kolben, standard Dosiernadeln, konischen Dosiernadeln, Kartuschenständer, Fingerschalter
Ansicht von schräg oben des roten Dosiergerätes IG-1500D mit Manometer, Druckregler, Zeitanzeige, Zeiteinstellungsblock, Vakuumregler, Schnellanschlussbuchse, Hauptschalter
Vorderseite des roten Dosiergerätes IG-1500D mit Manometer, Druckregler, Zeitanzeige, Zeiteinstellungsblock, Vakuumregler, Schnellanschlussbuchse, Hauptschalter
Rückseite des Dosiergerätes IG-1500D mit Luftauslass, Drucklufteingang, Fußpedalanschluss, Netzbuchse, Farbe rot
Rotes Dosiergerät IG-1500D mit Fußschalter und Fingerschalter

€694.00* / piece

Quantity
Unit price
From 1

€694.00

From 3
-2.7 %

€675.00

Delivery time: Available immediately

Output pressure

Request an offer for this product.

Request offer
Ersatzteile
Product number: IG-1500D-0-1BAR
Mindestbestellmenge: 1

Product information "Dispenser digital IG-1500D 0-1 BAR"

Digital or manual controlled dispenser IG-1500D, Air-out: 0,1 - 0 bar
(Successor to our IG-FU1000T-0-1bar)

In comparison to the 0-7 bar dispenser, the 0-1 bar dispenser is more suitable for low-viscosity materials, as the pressure range can be set more precisely.

With our dispenser IG-1500D, automatic dispensing is carried out via the digital setting of the time range
between 0.001 and 99.99 seconds.

Alternatively, the unit can be operated manually with the time setting "0000".
Dispensing continues as long as the foot pedal or the finger switch is actuated.

To avoid dripping of low-viscosity media, the dispenser is equipped with a vacuum retention system.

It is ready for operation in just a few steps and works maintenance-free.

The accessories included in the sales price allow easy connection to the compressed air network and immediate start of a dispensing job.

 

Characteristics of the IG-1500D:

  • 2 operating modes: manually / digitally time - controlled
  • Controlled via foot pedal or finger switch (both included)
  • Microprocessor controlled
  • Automatic timer memory
  • Timer with 4-digit digital display
  • Wide range of application
  • Dropping prevention with vacuum suck-back retention
  • 2 years warranty

Applications for IG-1500D 0,1 - 7 bar:
low to high viscosity materials (single and multi component):

  • Cyanoacrylates
  • Adhesives
  • Greases
  • UV-adhesives
  • Oils
  • and many more

Optionally, the following accessories can be ordered:

Properties from "Dispenser digital IG-1500D 0-1 BAR"
Dimensions: 22,0 x 21,0 x 6,8 cm
Dispensing time: 0,001 – 99,99 sec.
Input pressure: 5 – 7 bar
Input voltage: 230 VAC 50 / 60 Hz
Operating modes: manually or time-controlled
Output pressure: 0,1 – 1 bar
Program memory slots: 0
Standards: CE marking
Time setting: digitally
Vacuum suck-back: yes
Weight [kg]: 2,2 kg

https://www.youtube.com/watch?v=G0hwGHDvfQs

https://www.youtube.com/watch?v=Y2_XGlfA52Y

Manual
Skip product gallery

Accessories

Finger switch for 30/55cc syringe barrels
Finger switch for 30/55cc syringe barrels
Robust finger switch made of plastic for 30 and 55ml syringe barrelsSuitable for our dispensers IG-101D, IG-1113D and IG1500D where it is already included in the accessories.
Art.-Nr.: IG-DISP-HS

Available immediately

From €72.27
Finger switch for 3cc - 360cc syringe barrels
Finger switch for 3cc - 360cc syringe barrels
Easy Touch finger switch with hook and loop fasteneradjustable for all syringe barrel sizes:3cc - 55 ccm and cartridges: 75cc – 360ccSuitable for our dispensers IG-101D, IG-1113D and IG-1500D (and IG-FU1000T and IG-FU810)
Art.-Nr.: IG-DISP-HSMS

Available immediately

From €72.27
Fußpedal IG-DISP-F mit Anschlussstecker für Dosiergeräte
Foot pedal for dispensing devices IG-101D, IG-1500D and IG-1113D
Foot pedal for our dispensers IG-1500D, IG-1113D, and IG-101D A foot pedal is included in the accessory set of our dispensers IG-1500D, IG-1113D and IG-101D.
Art.-Nr.: IG-DISP-F

Available immediately

From €47.77
großes Fußpedal IG-DISP-FG mit Anschlusssteckerfür Dosiergeräte
Big foot pedal for the dispensing devices IG-1500D and IG-1113D
Big foot pedal for our dispensers IG-1500D, IG-1113D, and IG-101D Note: A normal sized foot pedal (IG-DISP-F) is included in the accessory set of our dispensers IG-1500D, IG-1113D and IG-101D.
Art.-Nr.: IG-DISP-FG

Delivery time: 1-3 days

€96.00
Syringe barrel clear 30 cc
Syringe barrel clear 30 cc
Art.-Nr.: IG-TE1E30C

Available immediately

From €0.74
Piston PE white 30/55 cc
Piston PE white 30/55 cc
Art.-Nr.: IG-TE9E3055W

Available immediately

From €0.46
Syringe barrel adapter 30/55 cc black
Syringe barrel adapter 30/55 cc black
Hose lenght: 1 m
This adapter does not fit syringe barrels with a round bottom. For syringe barrels with a round bottom, please use the green adapter IPI43055-GREEN! The cartridge adapter enables a quick and reliable connection of the LuerLock cartridge to the dispenser. For adapters with special lengths, please submit an enquiry with the desired hose length.
Art.-Nr.: IG-TEAE3055B-6.20

Delivery time: 1-3 days

From €20.03
Syringe barrel stand
Syringe barrel stand
Art.-Nr.: IG-DISP-SS

Available immediately

From €35.52
Dispensing tips set large, 144-parts
Dispensing tips set large, 144-parts
In our large dispensing tip set you will find a huge selection from our dispensing tips. Our set includes: 2 Stk. IP700-CLEAR 2 Stk. IP700-BLACK 5 Stk. IP525 5 Stk. IP522 5 Stk. IP518 5 Stk. IP516 5 Stk. IP514 5 Stk. IP730050 5 Stk. IP727050 5 Stk. IP725050 5 Stk. IP723050 5 Stk. IP722050 5 Stk. IP721050 5 Stk. IP720050 5 Stk. IP718050 5 Stk. IP715050 5 Stk. IP714050 2 Stk. IP715025 2 Stk. IP719025 2 Stk. IP722025 2 Stk. IP715100 2 Stk. IP718100 2 Stk. IP721100 2 Stk. IP714150 2 Stk. IP718150 2 Stk. IP723150 2 Stk. IP715-45 2 Stk. IP718-45 2 Stk. IP720-45 2 Stk. IP714-90 2 Stk. IP715-90 2 Stk. IP720-90 2 Stk. IP618050 2 Stk. IP620050 2 Stk. IP622050 2 Stk. IP615100 2 Stk. IP618150 2 Stk. IP620150 1 Stk. IP516-BLACK 1 Stk. IP518-BLACK 1 Stk. IP520-BLACK 2 Stk. IPM14050 2 Stk. IPM18100 2 Stk. IPM21100 2 Stk. IPA18050LT 2 Stk. IPA20050LT 2 Stk. IPA22050LT 1 Stk. IP800001 1 Stk. IP800002 1 Stk. IP800003
Art.-Nr.: Dosiernadelset

Available immediately

€62.00
Filter for cartridge adapter
Filter for cartridge adapter
Prevents reflux of low-viscosity materials in the dispensing device.
Art.-Nr.: 560034

Available immediately

€28.50
Skip product gallery

Similar-Items

Analogue Dispenser IG-1113D 0-1BAR with accessories
Dispenser analogue IG-1113D
Output pressure: 0,1 – 7 bar
Analogue or manually controlled dispenser IG-1113D Output pressure 0,1 - 7 Bar With our dispenser IG-1113D, automatic dispensing is carried out via the analog setting of the time rangebetween 0.01 and 8 seconds.Alternatively, the unit can be switched to manual mode at the touch of a button.Dispensing continues as long as the foot pedal or the finger switch is actuated.To avoid dripping of low-viscosity media, the dispenser is equipped with a vacuum retention system.It is ready for operation in just a few steps and works maintenance-free.The accessories included in the sales price allow easy connection to the compressed air network and immediate start of a dispensing job.   Characteristics of the IG-1113D: 2 operating modes: manually / analogue time - controlled Controlled via foot pedal or finger switch (both included) Microprocessor controlled Time conveniently adjustable via control dial Wide range of application Dropping prevention with vacuum suck-back retention Economic system with high reliability 2 years warranty Applications for IG-1113D 0,1 - 7 barlow to high viscosity materials (single and multi component): Cyanoacrylates Silikones Solder paste Adhesives Greases UV-adhesives Oils Casting compound and many more Optionally, the following accessories can be ordered: adapter for 3, 5, or 10cc syringe barrels (with hose in desired lenght) fingerswitch "Easy Touch" - adjustable by Velcro for all syringe barrels sizes (3, 5, 10, 30 and 55 cc) - IG-8101000HS-MS filter for syringe barrels adapter (prevents reflux of low-viscosity materials in the dispensing device) - 560034
Art.-Nr.: IG-1113D

Delivery time: Available immediately

From €418.00
Analogue Dispenser IG-1113D 0-1BAR with accessories
Dispenser analogue IG-1113D 0-1 BAR
Output pressure: 0,1 – 1 bar
Analogue or manually controlled dispenser IG-1113D Output pressure 0,1 - 1 Bar In comparison to the 0-7 bar device, the 0-1 bar device is more suitable for low-viscosity materials, as the pressure range can be set more precisely.With our dispenser IG-1113D, automatic dispensing is carried out via the analogue setting of the time rangebetween 0.01 and 8 seconds.Alternatively, the unit can be switched to manual mode at the touch of a button.Dispensing continues as long as the foot pedal or the finger switch is actuated.To avoid dripping of low-viscosity media, the dispenser is equipped with a vacuum retention system.It is ready for operation in just a few steps and works maintenance-free.The accessories included in the sales price allow easy connection to the compressed air network and immediate start of a dispensing job.   Characteristics of the IG-1113D: 2 operating modes: manually / analogue time - controlled Controlled via foot pedal or finger switch (both included) Microprocessor controlled Time conveniently adjustable via control dial Wide range of application Dropping prevention with vacuum suck-back retention Economic system with high reliability 2 years warranty Applications for IG-1113D 0,1 - 7 barlow to high viscosity materials (single and multi component): CyanoacrylatesAdhesives Greases UV-adhesives Oilsand many more Optionally, the following accessories can be ordered: adapter for 3, 5, or 10cc syringe barrels (with hose in desired length) fingerswitch "Easy Touch" - adjustable by Velcro for all syringe barrels sizes (3, 5, 10, 30 and 55 cc) - IG-8101000HS-MS filter for syringe barrels adapter (prevents reflux of low-viscosity materials in the dispensing device) - 560034
Art.-Nr.: IG-1113D-0-1BAR

Delivery time: Available immediately

Variants from €418.00
From €568.00
digital dispenser IG-101D with accessories
Dispenser digital IG-101D
Output pressure: 0,1 – 7 bar
Digital or manual controlled dispenser IG-101D, Air-out: 0,1 - 7 bar(Successor to our SL101N) With our dispenser IG-101D, automatic dispensing is carried out via the digital setting in TIMER mode with a rangebetween 0.001 and 9999 seconds.Alternatively, the unit can operated in manual mode by pressing the button PURGE.Dispensing continues as long as the foot pedal or the finger switch is actuated. In addition, the dispenser can be operated in circulation mode. In this mode, it is possible to set a pause time between the dispensing processes.To avoid dripping of low-viscosity media, the dispenser is equipped with a vacuum retention system.It is ready for operation in just a few steps and works maintenance-free.The accessories included in the sales price allow easy connection to the compressed air network and immediate start of a dispensing job. Characteristics of the IG-101D: 3 operating modes: manually / digitally time / cycle function time - controlled Controlled via foot pedal or finger switch (both included) Microprocessor controlled Automatic timer memory Timer with 4-digit digital display Wide range of application Dropping prevention with vacuum suck-back retention Pressure gauge to set the dispensinig pressure 9 program slots for storing and calling up dispensing times for time and automatic cycle 2 years warranty Applications for IG-101D low to high viscosity materials (single and multi component): Cyanoacrylates Silikones Solder paste Adhesives Greases UV-adhesives Oils Casting compound and many more Optionally, the following accessories can be ordered: adapter for 3, 5, or 10cc syringe barrels (with hose in desired lenght) finger switch "Easy Touch" - adjustable by Velcro for all syringe barrels sizes (3, 5, 10, 30 and 55 cc) - IG-8101000HS-MS filter for syringe barrels adapter (prevents reflux of low-viscosity materials in the dispensing device) - 560034
Art.-Nr.: IG-101D

Delivery time: Available immediately

From €632.00
digital dispenser IG-101D with accessories
Dispenser digital IG-101D 0-1 BAR
Output pressure: 0,1 – 1 bar
Digital or manual controlled dispenser IG-101D, Air-out: 0,1 - 0 bar(Successor to our SL101N-0-1bar) In comparison to the 0-7 bar dispenser, the 0-1 bar dispenser is more suitable for low-viscosity materials, as the pressure range can be set more precisely. With our dispenser IG-101D, automatic dispensing is carried out via the digital setting in TIMER mode with a rangebetween 0.001 and 9999 seconds.Alternatively, the unit can operated in manual mode by pressing the button PURGE.Dispensing continues as long as the foot pedal or the finger switch is actuated. In addition, the dispenser can be operated in circulation mode. In this mode, it is possible to set a pause time between the dispensing processes.To avoid dripping of low-viscosity media, the dispenser is equipped with a vacuum retention system.It is ready for operation in just a few steps and works maintenance-free.The accessories included in the sales price allow easy connection to the compressed air network and immediate start of a dispensing job. Characteristics of the IG-101D: 3 operating modes: manually / digitally time / cycle function time - controlled Controlled via foot pedal or finger switch (both included) Microprocessor controlled Automatic timer memory Timer with 4-digit digital display Wide range of application Dropping prevention with vacuum suck-back retention Pressure gauge to set the dispensinig pressure 9 program slots for storing and calling up dispensing times for time and automatic cycle 2 years warranty Applications for IG-101D low to high viscosity materials (single and multi component): CyanoacrylatesAdhesives Greases UV-adhesives Oilsand many more Optionally, the following accessories can be ordered: adapter for 3, 5, or 10cc syringe barrels (with hose in desired length) finger switch "Easy Touch" - adjustable by Velcro for all syringe barrels sizes (3, 5, 10, 30 and 55 cc) - IG-8101000HS-MS filter for syringe barrels adapter (prevents reflux of low-viscosity materials in the dispensing device) - 560034
Art.-Nr.: IG-101D-0-1BAR

Delivery time: Available immediately

Variants from €632.00
From €717.00
Fisnar Dispenser JB1113N
Fisnar Dispenser JB1113N
NO LONGER AVAILABLE - SEE IG-1113D Analogue or manually controlled Fisnar dispenser JB1113N Output pressure 0,1 - 7 Bar   for people who work with a dispenser for the first time, it is a very quickly controlled device. depots in point- and line form can be produced without reject. a detailed manual instruction is included with the device. telephone application support from our team is available free of charge.   The device is ready for use in a few steps and works maintenance-free.   In the sale price included accessories allow easy connection to the compressed air network and the immediate start of dispensing work.   The dispenser is equipped with a vacuum retention system to prevent delay yield of low-viscosity media. Time range adjustable between 0,01 sec. and 31 seconds   For special applications concerning dispensing material, output quantity etc. we can offer you extensive accessories like, dispensing tips, syringe barrels, pistons – plungers etc. Characteristics of the JB113N: 2 operating modes: manually / digitally time - controlled control via foot pedal or finger switch (both included in the price) microprocessor controls time conveniently adjustable via control dial 2-year functional guarantee wide range of application delay yield by vacuum retention system economic system with high reliability Application JB113N 0,1 - 7 Bar mainly forthick and thin liquids: cyanoacrylate silicones solder paste adhesives UV-adhesives casting compound oils greases laquers and many more  
Art.-Nr.: JB1113N

No longer available

Fisnar Dispenser digital SL101N
Fisnar Dispenser digital SL101N
Output pressure: 0,1 - 7 bar
NO LONGER AVAILABLE - SEE IG-101D   Digitally or manually controlled Fisnar dispenser SL101N Output pressure 0,1 - 7 Bar   for people who work with a dispenser for the first time, it is a very quickly controlled device. depots in point- and line form can be produced without reject. a detailed manual instruction is included with the device. telephone application support from our team is available free of charge.   The device is ready for use in a few steps and works maintenance-free.   In the sale price included accessories allow easy connection to the compressed air network and the immediate start of dispensing work.   The dispenser is equipped with a vacuum retention system to prevent delay yield of low-viscosity media. Time range adjustable between 0,01 sec. and 9999 seconds   For special applications concerning dispensing material, output quantity etc. we can offer you extensive accessories like, dispensing tips, syringe barrels, pistons – plungers etc.   Characteristics of the SL101N: 9 program slots for storing and calling up dispensing times for time and automatic cycle 3 operating modes: manually / digitally / cycle function time - controlled control via foot pedal or finger switch (both included in the price) microprocessor controls time automatic for compressed air on the material, adjustable via buttons on the front 2-year functional guarantee wide range of application delay yield by vacuum retention system economic system with high reliability Application SL101N 0,1 - 7 Bar for thick and thin liquids: cyanoacrylate silicones solder paste adhesives UV-adhesives casting compound oils greases laquers and many more  
Art.-Nr.: SL101N

No longer available