Precise Dispensing of Anaerobic Adhesives
Anaerobic adhesives are used for securing, sealing and bonding metallic components such as screws, threads, shafts, bearings and flange surfaces. They cure when confined between metal surfaces in the absence of oxygen. Precise and controlled material application is essential for reliable performance, as even small quantities may be sufficient.
Using suitable dispensing technology allows the adhesive to be applied with high repeatability, efficient material usage and reliable process control. The correct dispensing volume, a suitable dispensing tip, clean material cut-off and uniform wetting of the surface all play an important role. Depending on the application and production requirements, dispensing can be performed manually or automatically, ensuring consistent quality and efficient material use.
Typical requirements
Typical materials
Automated application of anaerobic adhesive to brass components in a tray. The adhesive is dispensed in a circular pattern on the inside at two different height positions, with different circle diameters. A diaphragm valve with plastic media-contacting parts is used so that the anaerobic adhesive does not cure inside the valve. The material is supplied via a 30 cc cartridge with separate material pre-pressure, while the valve is controlled via a second dispensing controller. The valve, cartridge and cross-slide are mounted on the fourth axis of the WRA-300 dispensing robot. The cross-slide makes it easy to manually adjust the dispensing tip in the X, Y and Z directions after a change and align the dispensing point precisely.
Delivery time: Available immediately
Delivery time: 14-28 days
Material, viscosity, dispensing volume, component geometry and the desired level of automation are key factors when selecting the right dispensing technology. We will be happy to analyze your application and recommend a suitable solution.