Demonstration Dispensers

Analogue or manually controlled dispenser IG-1113D Output pressure 0,1 - 7 Bar ATTENTION!  Demonstration devices show slight signs of wear and external paint damage. With our dispenser IG-1113D, automatic dispensing is carried out via the digital setting of the time rangebetween 0.01 and 8 seconds.Alternatively, the unit can be switched to manual mode at the touch of a button.Dispensing continues as long as the foot pedal or the finger switch is actuated.To avoid dripping of low-viscosity media, the dispenser is equipped with a vacuum retention system.It is ready for operation in just a few steps and works maintenance-free.The accessories included in the sales price allow easy connection to the compressed air network and immediate start of a dispensing job.   Characteristics of the IG-1113D: 2 operating modes: manually / analogue time - controlled Controlled via foot pedal or finger switch (both included) Microprocessor controlled Time conveniently adjustable via control dial Wide range of application Dropping prevention with vacuum suck-back retention Economic system with high reliability 2 years warranty Applications for IG-1113D 0,1 - 7 barlow to high viscosity materials (single and multi component): Cyanoacrylates Silikones Solder paste Adhesives Greases UV-adhesives Oils Casting compound and many more Optionally, the following accessories can be ordered: adapter for 3, 5, or 10cc syringe barrels (with hose in desired lenght) fingerswitch "Easy Touch" - adjustable by Velcro for all syringe barrels sizes (3, 5, 10, 30 and 55 cc) - IG-8101000HS-MS filter for syringe barrels adapter (prevents reflux of low-viscosity materials in the dispensing device) - 560034

Digital or manual controlled dispenser IG-1500D, Air-out: 0,1 - 7 bar(Successor to our IG-FU1000T) ATTENTION!  Demonstration devices show slight signs of wear and external paint damage. With our dispenser IG-1500D, automatic dispensing is carried out via the digital setting of the time rangebetween 0.001 and 99.99 seconds.Alternatively, the unit can be operated manually with the time setting "0000".Dispensing continues as long as the foot pedal or the finger switch is actuated.To avoid dripping of low-viscosity media, the dispenser is equipped with a vacuum retention system.It is ready for operation in just a few steps and works maintenance-free.The accessories included in the sales price allow easy connection to the compressed air network and immediate start of a dispensing job.   Characteristics of the IG-1500D: 2 operating modes: manually / digitally time - controlled Controlled via foot pedal or finger switch (both included) Microprocessor controlled Automatic timer memory Timer with 4-digit digital display Wide range of application Dropping prevention with vacuum suck-back retention 2 years warranty Applications for IG-1500D 0,1 - 7 bar low to high viscosity materials (single and multi component): Cyanoacrylates Silikones Solder paste Adhesives Greases UV-adhesives Oils Casting compound and many more Optionally, the following accessories can be ordered: adapter for 3, 5, or 10cc syringe barrels (with hose in desired lenght) finger switch "Easy Touch" - adjustable by Velcro for all syringe barrels sizes (3, 5, 10, 30 and 55 cc) - IG-8101000HS-MS filter for syringe barrels adapter (prevents reflux of low-viscosity materials in the dispensing device) - 560034

Analogue or manually controlled dispenser IG-1113D Output pressure 0,1 - 1 Bar ATTENTION!  Demonstration devices show slight signs of wear and external paint damage. In contrast to the 0-7 bar device, the 0-1 bar device is better suited for low viscosity materials,as the pressure range can be adjusted more precisely. With our dispenser IG-1113D, automatic dispensing is carried out via the analog setting of the time rangebetween 0.01 and 8 seconds.Alternatively, the unit can be switched to manual mode at the touch of a button.Dispensing continues as long as the foot pedal or the finger switch is actuated.To avoid dripping of low-viscosity media, the dispenser is equipped with a vacuum retention system.It is ready for operation in just a few steps and works maintenance-free.The accessories included in the sales price allow easy connection to the compressed air network and immediate start of a dispensing job.   Characteristics of the IG-1113D: 2 operating modes: manually / analogue time - controlled Controlled via foot pedal or finger switch (both included) Microprocessor controlled Time conveniently adjustable via control dial Wide range of application Dropping prevention with vacuum suck-back retention Economic system with high reliability 2 years warranty Applications for IG-1113D 0,1 - 1 barlow to medium viscosity materials (single and multi component): Cyanoacrylates Anaerobic glue SMD glue UV-adhesives Oils and many more Optionally, the following accessories can be ordered: adapter for 3, 5, or 10cc syringe barrels (with hose in desired lenght) fingerswitch "Easy Touch" - adjustable by Velcro for all syringe barrels sizes (3, 5, 10, 30 and 55 cc) - IG-8101000HS-MS filter for syringe barrels adapter (prevents reflux of low-viscosity materials in the dispensing device) - 560034

Digital or manual controlled dispenser IG-1500D, Air-out: 0,1 - 1 bar(Successor to our IG-FU1000T) ATTENTION!  Demonstration devices show slight signs of wear and external paint damage. In contrast to the 0-7 bar device, the 0-1 bar device is better suited for low viscosity materials, as the pressure range can be adjusted more precisely. With our dispenser IG-1500D, automatic dispensing is carried out via the digital setting of the time range between 0.001 and 99.99 seconds. Alternatively, the unit can be operated manually with the time setting "0000".Dispensing continues as long as the foot pedal or the finger switch is actuated.To avoid dripping of low-viscosity media, the dispenser is equipped with a vacuum retention system.It is ready for operation in just a few steps and works maintenance-free.The accessories included in the sales price allow easy connection to the compressed air network and immediate start of a dispensing job.   Characteristics of the IG-1500D: 2 operating modes: manually / digitally time - controlled Controlled via foot pedal or finger switch (both included) Microprocessor controlled Automatic timer memory Timer with 4-digit digital display Wide range of application Dropping prevention with vacuum suck-back retention 2 years warranty Applications for IG-1500D 0,1 - 1 bar: low to medium viscosity materials (single and multi component): Cyanoacrylates Anaerobic glue SMD glue UV-adhesives Oils and many more Optionally, the following accessories can be ordered: adapter for 3, 5, or 10cc syringe barrels (with hose in desired lenght) finger switch "Easy Touch" - adjustable by Velcro for all syringe barrels sizes (3, 5, 10, 30 and 55 cc) - IG-8101000HS-MS filter for syringe barrels adapter (prevents reflux of low-viscosity materials in the dispensing device) - 560034