Pinch tube transparent, ID: 0,1" (2,54mm) Suitable for the pinch valve IG-FU-1212

Pinch tube transparent, soft, ID: 0,1" (2,54mm) Material: PU Suitable for the pinch valve IG-FU-1212

Pinch tube transparent, ID: 0,1" (2,54mm) Suitable for the pinch valve IG-FU-1212

Pinch tube transparent, ID: 0,1" (2,54mm) Suitable for the pinch valve IG-FU-1212

Pinch tube black, ID: 0,1" (2,54mm) Suitable for the pinch valve IG-FU-1212

Pinch tube transparent, ID: 0,1" (2,54mm) Suitable for the pinch valve IG-FU-1212

The conditioner is suitable for cleaning of our dispensing valves. After use but before disassembling, the dispensing valve should be "flushed" with the conditioner. This provides a basic cleaning, where the remains of your dispensing material are discharged.The conditioner is Vaseline-based and is suitable for all our valves.

Suitable for the pinch valve IG-FU-1212

Compact Controller for Precise Control of the PDos X1 Jet ValvePrecise control of the PDos X1 jet valveEasy adjustment of dispensing parametersFor reproducible and fast jet dispensing processes The VC1 controller controls the PDos X1 jet valve. The relevant dispensing parameters can be adjusted to the specific process to apply small and repeatable material volumes without contact. The coordinated combination of controller and jet valve makes the system suitable for automated applications as well as test and laboratory setups.Functions of the VC1 ControllerOperating modes: Continuous, Start / Stop, Single, Shot Count, DirectDispensing frequencyHeating controlExternal triggeringProcess monitoringShot counterService intervalPassword protection Advantages of the VC1 ControllerControl specifically designed for the PDos X1 jet valve Fast adjustment of dispensing parameters Reproducible settings Easy integration into dispensing systems Suitable for manual and automated processes Compact designApplications for the VC1Contactless dispensing of small material volumes Dispensing onto sensitive or difficult-to-reach components Dispensing with short cycle times Dot dispensing and recurring dispensing patterns Integration into dispensing robots and automated systems Test setups and process development Compatible ComponentsJet ValvePDos X1 Optional System Components Material Pressure Vessels Cartridges and Material Feed Systems Dispensing Robots Valve Mounts Material Hoses and Fittings Heated components, where applicable The VC1 controller is designed to control the PDos X1. Compatibility with other valves must be checked separately.