Diaphragm valve, Stainless Steel
- Order number: GV-1625
- MOQ: 1
Our diaphragm dispensing valve is suitable to dispense low to medium viscosity materials. The... more
Product information "Diaphragm valve, Stainless Steel"
Our diaphragm dispensing valve is suitable to dispense low to medium viscosity materials. The wetted parts are separated from the valve control units. This is excellently well suited for dispensing aggressive or very low viscosity materials like paints, inks, cyanoacrylates or oils, especially when high frequency output cycles of small dosing quantities are required. The respective quantities can be exactly set via a fine adjustment on the head of the valve.
Our dispensers can be used as compressed air controls.
In order to be able to remove coarse remnants of the dispensing material from the valve, we recommend our conditioner.
The valve body is made from high quality Stainless Steel!
Technical details:
material inlet: | 1/8" NPT thread |
material outlet: | LuerLock male |
control air inlet: | M5 thread |
weight: | 87 g |
dimensions: | 80mm lenght, Ø 27 mm |
operating pressure: | 4 bar |
operating frequency: | 500 cycles/min. |
flow rate (water at 100psi): | 300 mL/min. |
fluid viscosity range: | up to 50.000 mPas |
fluid pressure: | max. 5 bar |