Bucket pump manual ID 210 - 240mm

With the hand refilling pump high viscous and pasty media can be easily, fast and clean transfered from the original container (bucket) into 3cc to 360cc cartridges.

The pump should be fixed with the fixing cross on the edge of the bucket. The follower plate wipes the material off the container wall and pushes it down to the riser pipe. The follower plate's diameter must be larger than the inside diameter of your material container!

The small rest of the material that remains on the bottom of the empty bucket can be easily removed with a scraper into the next full bucket - in this way no material is wasted.

The flow rate is around 30cc per stroke.

The dust cover, the fixing cross and follower plate is already included. Also the coupler fitting for LuerLock barrels is already within the set: this allows to connect the LuerLock syringe barrels directly to the pump: "outlet to outlet" so that no air becomes trapped in the transfered material.

Features:

•   easy, fast and clean method to transfer pasty material from large containers
•   clean emptying of buckets
•   direct and bubble-free filling of syringe barrels
•   follower plates / pumps for different sizes of original buckets available (round; sizes meaning the minimum to maximum inner diameter of the buckets):
  -)   90 - 180mm
  -) 180 - 210mm
  -) 210 - 240mm
  -) 240 - 270mm
  -) 270 - 290mm
  -) 290 - 310mm
  -) 310 - 335mm
  -) 335 - 385mm