Dispensing Guns

In our shop you will find a big selection of manual and pneumatic dispensing guns.

Whether you are looking for a dispensing gun for one or two-component cartridges, we have the right solution for you!
If you cannot find the right gun please send us your request, we will try to find a gun suitable for your application.

MAN GUN 310ml 1-comp, black or red

Colour: Rot

Our manual dispensing gun is ideal for liquids and pastes that are very easy and precise to use. Essential here is the lightweight construction made of glass fiber reinforced nylon. The insert is absolutely self-sufficient, you need no compressed air and no electricity. The system is completely maintenance-free, as the medium used does not touch any components of the dispensing gun. for cartridges up to 310 ml (length up to 215 mm, Ø 50 mm) Weight: 550 g Length: 330 mm

Art.-Nr.: H1X

Available immediately

€12.50

Dispensing gun H260 2-comp 345ml MR 10:1

Small, lightweight, manual hand-held gun for 2-component adhesives in 345ml double cartridges. With a strong double ratio, this pistol is also suitable for high viscosities. For cartridge size: 345 ml (length 215 mm, width 69 mm, Ø 49 mm) Mixing ratio: 10:1 Weight: 900 g Length: 348 mm

Art.-Nr.: H260

Available immediately

€32.50

MAN GUN 2-comp 50ml MR 1:1 / 2:1, 4:1, 10:1

Small, light in weight, manual dispensing gun for 2-component materials in 50ml cartridges.With a good transmission this gun is suitable for low to middle viscosity materials. Different mixing ratios can be achieved by easy changing of the plunger. For cartridge size: 50 mlMixing Ratio: 1:1 / 2:1 or 4:1 or 10:1Weigth: 200 gLenght: 180 mm Note: NOT suitable for 2-component cartridges of the type “S-system“ (e.g. UHU-Plus)!

Art.-Nr.: MAN50M

Available immediately

From €34.50

Dispensing gun H285S 2-comp 380ml MR 10:1

Small, lightweight, manual hand-held gun for 2-component adhesives in 380ml coaxial cartridges. With a strong double ratio, this pistol is also suitable for high viscosities. For cartridge size: 380 ml (length 181-183 mm, Ø 62.5 - 63 mm) Mixing ratio: 10: 1 (piston diameter inside 21mm- 22mm) Weight: 1.080 g Length: 305 mm

Art.-Nr.: H285S

Available immediately

€34.50

Dispensing gun 1-comp 10cc incl. plunger and O-Ring

This manual dispensing gun is suitable for easy and precise dispensing of high and low viscosity materials. It is very light in weight and made of high-strength plastic. No need of pressured air or power supply. The gun is mentenaince-free, no part of the gun gets in contact with the applicated material. For cartridge sizes: 10ccm (not compatible with round bottom cartridges)Weight: 115 gLenght: 190 mm (incl. Plunger)

Art.-Nr.: IG-FU-SG10

Available immediately

From €38.23

Dispensing gun 1-comp 30/55cc incl. plunger and O-Ring

This manual dispensing gun is suitable for easy and precise dispensing of high and low viscosity materials. It is very light in weight and made of high-strength plastic. No need of pressured air or power supply. The gun is mentenaince-free, no part of the gun gets in contact with the applicated material. For cartridge sizes: 30 and 55 ccmWeight: 115 gLenght: 190 mm (incl. Plunger)

Art.-Nr.: IG-FU-SG3055

Available immediately

From €51.04

PNEU GUN 600ml bag

This pneumatic hand-held pistol is suitable for processing low-viscosity substances from 600ml bags. The working pressure is 1.6 kN. For bag size: 600 ml (length 335mm, Ø 50mm) Weight: 980 g Length: 375 mm Air connection: 8 bar

Art.-Nr.: T22X

Available immediately

€59.00

Dispensing gun H236 2-comp 200ml MR 1:1 / 2:1

Small, lightweight, manual hand-held gun for 2-component adhesives in 200ml double cartridges. With a strong double ratio, this pistol is also suitable for high viscosities. For cartridge size: 200 ml (length 149 mm, width 77 mm, Ø each 38 mm) Mixing ratio: 1:1 or 2:1 Weight: 1.070 g Length: 300 mm Länge: 300 mm

Art.-Nr.: H236

Delivery time on request

€129.00

MAN GUN 2-comp 200ml MR 1:1 / 2:1

Small, light in weight, manual dispensing gun for 2-component materials in 200ml cartridges.With a strong double transmission this gun is suitable for up to high viscosity materials. For cartridge size: 200 ml (Lenght: 149 mm, Width: 77 mm, Ø 38 mm each)Mixing Ratio: 1:1 or 2:1Weight: 1.070 gLenght: 300 mm

Art.-Nr.: MAN200

Available immediately

€149.00

Dispensing gun H236M-410 2-comp 200ml MR 4:1 / 10:1

Small, lightweight, manual hand-held gun for 2-component adhesives in 200ml double cartridges. With a strong double ratio, this pistol is also suitable for high viscosities.For cartridge size: 200 ml (length 149 mm, width 77 mm, Ø each 38 mm) Mixing ratio: 4:1, 10:1.

Art.-Nr.: H236M-410

Available immediately

€159.00

manual SEMCO gun 180cc

manual dispensing gun for 180cc SEMCO cartridges

Art.-Nr.: 2218302

Delivery time on request

Dispensing gun 10cc, metal

hand dispensing gun 10cc made of metal. suitable for standard disposable syringe barrel.

Art.-Nr.: GV990110-10

Delivery time on request

€294.00

Dispensing gun 30cc, metal

hand dispensing gun 30cc made of metal. suitable for standard disposable syringe barrel.

Art.-Nr.: GV990110-30

Delivery time on request

€294.00

Dispensing gun 55cc, metal

hand dispensing gun 55cc made of metal. suitable for standard disposable syringe barrel.

Art.-Nr.: GV990110-55

Delivery time on request

€294.00

Dispensing gun TS483LX 2-comp 400ml MR 1:1

This pneumatic hand pressure pistol is suitable for the processing of medium viscous substances from 400ml double cartridges. The working pressure is 2.7 kN. For cartridge size: 400 ml (length 185mm, width 93mm, height 47mm) Mixing ratio: 1:1 Weight: 1.920 g Length: 475 mm Air connection: 8 bar

Art.-Nr.: TS483LX

Available immediately

€339.00

Dispensing gun TS408MY-8 2-comp 50ml MR 1:1 / 2:1

This pneumatic hand pressure gun is suitable for the processing of low to medium viscous substances from 50ml double cartridges. The working pressure is 1.3 kN. For cartridge size: 50 ml (length 115mm, width 46.5mm, height 26mm) Mixing ratio: 1:1 or 2:1 Weight: 730 g Length: 300 mm Air connection: 8 bar Luftanschluß: 8 bar

Art.-Nr.: TS408M

Delivery time on request

€399.00

PNEU GUN 2-comp 200ml MR 1:1 / 2:1

This pneumatic hand pressure pistol is suitable for the processing of medium to high viscous substances from 200ml or 210ml double cartridges. Infinitely adjustable working pressure. Case made of aluminum alloy (pressure tube Ø 70mm), wear-resistant mechanism. max. Cartridge length: 152mm, max. Cartridge width 79mm, max. Cartridge depth 45mm For cartridge size: 200 ml in a mixing ratio of 1:1 (length 150mm, width 77mm, Ø 37mm each) 210 ml in the mixing ratio 2:1 (length 150mm, width 75mm, Ø 44mm + Ø 31mm) Mixing ratio: 1:1 or 2:1 Weight: 1.600 g Air connection: 6 bar

Art.-Nr.: PNEU200

Delivery time on request

€399.00

Dispensing Guns

Filter products