Demonstration dispenser IG-FU810 0-1 BAR
€349.00* / piece
Available immediately
Product information "Demonstration dispenser IG-FU810 0-1 BAR"
Demonstration devices with slight signs of wear and external paint damage at an absolute top price!
Prices and availability on request
Analogue or manually controlled dispenser IG-FU810 Output pressure 0,1 - 1 Bar
Automatic dispensing takes place via the analogue setting of time domain by using a control dial (in the range between 0,01 to 8 seconds). Alternatively, the device can be operated manually with one keystroke. Dispensing takes place as long as the foot pedal or the finger switch is pressed.
The dispenser is equipped with a vacuum retention system to prevent delay yield of low-viscosity media.
In the sale price included accessories allow easy connection to the compressed air network and the immediate start of dispensing work.
The device is ready for use in a few steps and works maintenance-free.
For special applications concerning dispensing material, output quantity etc. we can offer you extensive accessories like, dispensing tips, syringe barrels, pistons – plungers etc.
You can ask for guidance for dispensing your special material by contacting us:
Characteristics of the IG-FU810:
- 2 operating modes: manually / analogue time - controlled
- controlled via foot pedal or finger switch (both included)
- microprocessor controlled
- 2 years warranty
- time conveniently adjustable via control dial
- wide range of application
- dropping prevention with vacuum suck-back retention
- economic system with high reliability
Applications for IG-FU810 0,1 - 1 bar: low to high viscosity materials:
- cyanoacrylates
- solder paste
- adhesives
- uv-adhesives
- oils
- and many more
Optionally, the following accessories can be ordered:
- adapter for 3, 5, or 10cc syringe barrels (with hose in desired lenght)
- fingerswitch "Easy Touch" - adjustable by Velcro for all syringe barrels sizes (3, 5, 10, 30 and 55 cc) - eIG-8101000HS-MS
- filter for syringe barrels adapter (prevents reflux of low-viscosity materials in the dispensing device) - e560034
Further details can be found in our operating instruction (PDF).
| Dimensions: | 22,0 x 21,0 x 6,8 cm |
|---|---|
| Dispensing time: | 0,01 - 8 sec. |
| Input pressure: | 5 – 7 bar |
| Input voltage: | 230 VAC 50 / 60 Hz |
| Operating modes: | manually or time-controlled |
| Output pressure: | 0,1 – 1 bar |
| Program memory slots: | 0 |
| Standards: | CE marking |
| Time setting: | analogue |
| Vacuum suck-back: | yes |
| Weight [kg]: | 2,2 kg |
Accessories
Available immediately
Available immediately
Available immediately
Available immediately
Available immediately
Available immediately
Available immediately
Available immediately
Available immediately
Available immediately
Available immediately
Available immediately
Available immediately