Dispensig valves & accessories

With our dispensing valves, you can apply low- medium viscosity materials in small quantities precisely and repeatedly. The flow rate of the materials can be controlled with the dispensing valves. You can use our analog/digital dispenser or dispensing robot to control the valves.

Valves

Accessories

Pinch tube transparent

Pinch tube transparent, ID: 0,1" (2,54mm) Suitable for the pinch valve IG-FU-1212

Art.-Nr.: IG-FU-1212-001

Sofort verfügbar

From €5.20*

Pinch tube transparent, soft

Pinch tube transparent, soft, ID: 0,1" (2,54mm) Material: PU Suitable for the pinch valve IG-FU-1212

Art.-Nr.: IG-FU-1212-001PU

Sofort verfügbar

From €5.20*

Pinch tube transparent 18"

Pinch tube transparent, ID: 0,1" (2,54mm) Suitable for the pinch valve IG-FU-1212

Art.-Nr.: IG-1212-0100MF-18

Sofort verfügbar

From €5.54*

Pinch tube transparent 24"

Pinch tube transparent, ID: 0,1" (2,54mm) Suitable for the pinch valve IG-FU-1212

Art.-Nr.: IG-1212-0100MF-24

Sofort verfügbar

From €5.95*

Pinch tube black

Pinch tube black, ID: 0,1" (2,54mm) Suitable for the pinch valve IG-FU-1212

Art.-Nr.: IG-FU-1212-001B

Sofort verfügbar

From €6.12*

Pinch tube transparent 36"

Pinch tube transparent, ID: 0,1" (2,54mm) Suitable for the pinch valve IG-FU-1212

Art.-Nr.: IG-1212-0100MF-36

Sofort verfügbar

From €6.64*

Conditioner yellow 30cc

The conditioner is suitable for cleaning of our dispensing valves. After use but before disassembling, the dispensing valve should be "flushed" with the conditioner. This provides a basic cleaning, where the remains of your dispensing material are discharged.The conditioner is Vaseline-based and is suitable for all our valves.

Art.-Nr.: GV990223-30

Sofort verfügbar

From €9.00*

Repair Kit small for Needle valve

Art.-Nr.: GV-0034

Sofort verfügbar

€71.20*

Repair Kit small for Spool valve

Art.-Nr.: GV-0062

Sofort verfügbar

€98.60*

Valve stand for Pinch tube valve IG-FU-1212

Suitable for the pinch valve IG-FU-1212

Art.-Nr.: IG-FU-1212-016-MSRC

Sofort verfügbar

€219.56*

Repair Kit big for Spool valve

Art.-Nr.: GV-0065

Lieferzeit auf Anfrage

€282.80*

Pinch tube valve

Our pinch tube valve is suitable to dispense semi-viscous materials including two-part fluids, cyanoacrylates as well as other liquids such anaerobics, which dictate “non-metallic” valves. Only the PE pinch tube gets in contact with the material. Should the material cure inside the hose, the pinch tube assembly can be easily replaced. The pinch tube valve is closed with an internal spring. Compressed air is used to open the piston against the spring force. This allows the material to flow. The shot size or flow rate is determined by the viscosity and the pre-pressure of the material as well as the valve control timer. You can connect dispensing tips or material supply hoses easily to the LuerLock connections of the pinch tube. Our dispensers can be used as compressed air controls. Info: equivalent to 710-HPNM Delivery contents: -) valve-) pinch tube-) dispensing tips - set-) manual-) control air hose Accessories: -) valve holder IG-FU-1212-016-MSRC-) pinch tube (in desired lenghts) Technical details: material inlet: LuerLock female material outlet: LuerLock male material pinch tube: PE weight: 83 g dimensions: 75mm lenght operating pressure: 4 - 7 bar

Art.-Nr.: IG-FU-1212

Sofort verfügbar

€283.12*

Repair Kit big for Needle valve

Art.-Nr.: GV-0039

Lieferzeit auf Anfrage

€413.00*

High pressure spool valve

Our high pressure spool valve is suitable to dispense high flow rates of medium to high viscosity materials. The reverse action closure of the valve provides a “suck-back” effect. The valve opens with the control air (min. 4bar). Usually the valve closes with spring force when the controll air is off. Optionally auxiliary air can be used for faster closure. Our dispensers can be used as compressed air controls. In order to be able to remove coarse remnants of the dispensing material from the valve, we recommend our conditioner. The valve body is made from high quality Stainless Steel! Previous article number: 790HPNM Technical details: material inlet: 1/4" NPT thread material outlet: 1/4" NPT thread control air inlet: 1/4" NPT thread weight: 520 g dimensions: 118mm lenght, Ø 38 mm operating pressure: 4 bar operation frequency: 600 Zyklen/min. flow rate (water at 100psi): 39.000 ml/min. fluid viscosity range: up to 3.000.000 mPas fluid pressure: max. 170 bar

Art.-Nr.: GV-1370

Sofort verfügbar

€665.00*

Diaphragm valve, Stainless Steel

Our diaphragm dispensing valve is suitable to dispense low to medium viscosity materials. The wetted parts are separated from the valve control units. This is excellently well suited for dispensing aggressive or very low viscosity materials like paints, inks, cyanoacrylates or oils, especially when high frequency output cycles of small dosing quantities are required. The respective quantities can be exactly set via a fine adjustment on the head of the valve. Our dispensers can be used as compressed air controls. In order to be able to remove coarse remnants of the dispensing material from the valve, we recommend our conditioner. The valve body is made from high quality Stainless Steel! Technical details: material inlet: 1/8" NPT thread material outlet: LuerLock male control air inlet: M5 thread weight: 87 g dimensions: 80mm lenght, Ø 27 mm operating pressure: 4 bar operating frequency: 500 cycles/min. flow rate (water at 100psi): 300 mL/min. fluid viscosity range: up to 50.000 mPas fluid pressure: max. 5 bar

Art.-Nr.: GV-1625

Sofort verfügbar

€980.00*

Spool valve, Stainless Steel

Our Spool valve is suitable to dispense medium to high viscosity materials. The reverse action closure of the valve provides a “suck-back” effect, which is easily adjustable via a set screw on the valve. This is very helpful and prevents undesirable after-dropping of the material. The valve opens with the control air (min. 3,5bar). Usually the valve closes with spring force when the control air is off. Optionally auxiliary air can be used for faster closure. Our dispensers can be used as compressed air controls. In order to be able to remove coarse remnants of the dispensing material from the valve, we recommend our conditioner. The valve body is made from high quality Stainless Steel! Technical details: material inlet: 1/8" NPT thread material outlet: 1/8" NPT thread contlrol air inlet: M5 thread weight: 160 g dimensions: lenght 102mm, Ø 35 mm operating pressure: min. 3,5 bar operating frequency: 700 cycles/min. flow rate (water at 100psi): 2.700 mL/min. fluid viscosity range: up to 1.000.000 mPas fluid pressure: max. 34bar

Art.-Nr.: GV-1325

Sofort verfügbar

€1,065.00*

Needle valve, Stainless Steel

The needle valve is suitable for dispensing of low to medium viscosity materials. It enables to apply even extremely small individual shots of material. The valve opens with the control air (min. 5bar). Usually the valve closes with spring force when the controll air is off. Optionally auxiliary air can be used for faster closure. Of course the flow rate of the material depends on the viscosity rate of the material and the pre-pressure of the material but it can be easily adjusted over the rotating wheel on the valve. Our dispensers can be used as compressed air controls. In order to be able to remove coarse remnants of the dispensing material from the valve, we recommend our conditioner. The valve body is made from high quality Stainless Steel! Technical details: material inlet: 1/8" NPT thread material outlet: LuerLock male compressed air inlet: M5 thread weight: 210 g dimensions: lenght 115mm, Ø 28,5mm operating air pressure: min. 5 bar operating frequency: 600 cycles/min. flow rate (water at 100psi): 1.680 ml/min. fluid viscosity rate: up to 100.000 mPas fluid pressure: max. 20 bar

Art.-Nr.: GV-1425

Sofort verfügbar

€1,185.00*