Dispenser analogue IG-FU810
Analogue or manually controlled dispenser IG-FU810 Output pressure 0,1 - 7 Bar
Automatic dispensing takes place via the analogue setting of time domain by using a control dial (in the range between 0,01 to 8 seconds). Alternatively, the device can be operated manually with one keystroke. Dispensing takes place as long as the foot pedal or the finger switch is pressed.
The dispenser is equipped with a vacuum retention system to prevent delay yield of low-viscosity media.
In the sale price included accessories allow easy connection to the compressed air network and the immediate start of dispensing work.
The device is ready for use in a few steps and works maintenance-free.
For special applications concerning dispensing material, output quantity etc. we can offer you extensive accessories like, dispensing tips, syringe barrels, pistons – plungers etc.
You can ask for guidance for dispensing your special material by contacting us:
Characteristics of the IG-FU810:
- 2 operating modes: manually / analogue time - controlled
- Controlled via foot pedal or finger switch (both included)
- Microprocessor controlled
- 2 years warranty
- Time conveniently adjustable via control dial
- Wide range of application
- Dropping prevention with vacuum suck-back retention
- Economic system with high reliability
Applications for IG-FU810 0,1 - 7 bar
low to high viscosity materials (single and multi component):
- Cyanoacrylates
- Silikones
- Solder paste
- Adhesives
- Greases
- UV-adhesives
- Oils
- Casting compound
- and many more
Optionally, the following accessories can be ordered:
- adapter for 3, 5, or 10cc syringe barrels (with hose in desired lenght)
- fingerswitch "Easy Touch" - adjustable by Velcro for all syringe barrels sizes (3, 5, 10, 30 and 55 cc) - eIG-8101000HS-MS
- filter for syringe barrels adapter (prevents reflux of low-viscosity materials in the dispensing device) - e560034
Further details can be found in our operating instruction (PDF).
| Dimensions: | 20 x 20 x 7,5 cm |
| Dispensing time: | 0,01 - 8 sec. |
| Time setting: | analogue |
| Operating modes: | manually or time-controlled |
| Vacuum suck-back: | yes |
| Power supply: | 230 VAC 50 / 60 Hz |
| Program positions: | 0 |
| Input pressure: | 5 – 7 bar |
| Output pressure: | 0,1 – 7 bar |
| Standards: | CE marking |
| Weight [kg]: | 2,2 kg |
- 5 pieces 30cc syringe barrels with pistons
- 1x syringe barrel stand
- 1 piece barrel adapter complete 30/55cc
- 12 pieces tapered tips
- 10 pieces dispensing tips LuerLock
- 2 pieces barrel tip cap clear
- 1x foot pedal
- 1x fingerswitch for 30/55cc syringe barrels
- 1x main power connection
- 1x air hose
NEW with more Accessories:
- 1 piece Adapter complete 5cc
- 2 pieces 5cc syring barrel
- 2 pieces 5cc piston
- 2 pieces 75cc syring barrel
- 2 pieces 75cc piston
- 5 pieces 30cc syringe barrels with pistons
- 1x syringe barrel stand
- 1 piece barrel adapter complete 30/55cc
- 12 pieces tapered tips
- 10 pieces dispensing tips LuerLock
- 2 pieces barrel tip cap clear
- 1x foot pedal
- 1x fingerswitch for 30/55cc syringe barrels
- 1x main power connection
- 1x air hose
NEW with more Accessories:
- 1 piece Adapter complete 5cc
- 2 pieces 5cc syring barrel
- 2 pieces 5cc piston
- 2 pieces 75cc syring barrel
- 2 pieces 75cc piston
