Araldite 2012 50ml

GONANO Dosiertechnik

€37.02* / piece

Quantity

Unit price

From 1

€37.02

From 6

-21.5 %

€29.07

Available immediately

Request an offer for this product.

Request offer

Product number: 2012-50

Mindestbestellmenge: 1

Product information "Araldite 2012 50ml"

HUNTSMAN's Araldite 2012 is a two-component, epoxy-based, paste adhesive that cures quickly at room temperature. The thixotropic adhesive has good contact adhesion and toughness and is suitable for bonding a wide range of metals, ceramics, glass, rubber, hard plastics and most common materials. It is a versatile adhesive suitable for both craft and most industrial applications.

*LSS = Lap Shear Strenght

Properties from "Araldite 2012 50ml"

Cartridge system:	A-System
Elastic modulus in N/mm² (at 23°C):	2520
Fracture strain in % (at 23°C):	4
Manufacturer:	Huntsman
Mixing ratio:	1:1
Pot life [Min.] (100g at 23°C):	6
Reactivity [Min.] (cure time at 23°C to LSS* = 10N/mm² ):	20
Size [ml]:	50
Tensile shear strenght [N/mm²] (Al at 23°C):	18

technical data sheet

Zubehör-Artikel

Mixing tube 50

The mixing tube “MI50“ fits to the 50ml MR 1:1 and 2:1 Araldite cartridges.

Art.-Nr.: MI50

Available immediately

From €0.90

MAN GUN 2-comp 50ml MR 1:1 / 2:1, 4:1, 10:1

Small, light in weight, manual dispensing gun for 2-component materials in 50ml cartridges.With a good transmission this gun is suitable for low to middle viscosity materials. Different mixing ratios can be achieved by easy changing of the plunger. For cartridge size: 50 mlMixing Ratio: 1:1 / 2:1 or 4:1 or 10:1Weigth: 200 gLenght: 180 mm Note: NOT suitable for 2-component cartridges of the type “S-system“ (e.g. UHU-Plus)!

Art.-Nr.: MAN50M

Available immediately

From €34.50

Handdosiersystem SDV50 für 50 ml Doppelkartuschen im Mischungsverhältnis 1:1

Hand dispensing system 2-comp 50ml 1:1 mixing ratio

The SDV50 2-component manual dispensing system allows easy dispensing of 2-component materials directly from the 50ml cartridges using our time-pressure dispensers. This offers the advantage that the control can be much more precise and easier than with conventional dispensing guns. The SDV50 2-component manual dispensing system in the standard version is compatible with 2-component 50ml cartridges of system A and system B / cartridges with bayonet connection. The hand dispensing system SDV50 is easily equipped with the 2-component syringe barrel (see also our application video) and connected to the compressed air outlet of the dispenser. By pressing the foot pedal, the dispensing process is triggered: either in manual mode (material is dispensed as long as you hold down the footswitch), or timed (one time triggering the foot pedal - the dispensing unit dispense as long as the time you set). Due to the compact design, the hand dispensing system SDV50 can be easily guided by hand. Alternatively, the SDV50 manual dispensing system can be mounted on a stand: in this case, you simply move your workpiece under the mixing tube. For a syringe barrel change, the pistons must be pulled back out of the syringe barrel. This is done by means of the vacuum regulator of the dispenser: open the vacuum regulator completely and the pistons are pulled out of the syringe barrel. Then the cartridge holder can be removed laterally to insert a new syringe barrel. Additional available cartridge holders: system B system S / dental system (UHU double cartridge)

Art.-Nr.: GGA-SDV50-1-1

Available immediately

€299.00