ERGO 7410 50ml epoxy adhesive

GONANO Dosiertechnik

Structural adhesive ERGO 7410 50ml cartridge

€31.47* / piece

Quantity

Unit price

From 1

€31.47

From 6

-20.1 %

€25.16

Delivery time: 1-3 days

Request an offer for this product.

Request offer

Product number: 7410-50

Mindestbestellmenge: 1

Product information "ERGO 7410 50ml epoxy adhesive"

The epoxy resin structural adhesive ERGO 7410 from Kisling is a transparent, fast curing and universal epoxy resin adhesive with good adhesion to metals, ceramics, glass, rubber and hard plastics. The low to medium viscosity allows for easy application. The 7410 is often used as a repair adhesive, for potting cables, in jewellery making or as a construction adhesive.

Can be used as an alternative to Araldite 2012.

Properties from "ERGO 7410 50ml epoxy adhesive"

Cartridge system:	B-System
Colour:	(nach Aushärtung / after curing), transparent
Elongation at break [%] (Nach DIN 53504):	~6
Final strenght [h]:	~48
Fixture time [min]:	6 - 7
Manufacturer:	Kisling
Mixing ratio:	1:1 (V:V)
Pot life [min]:	3 - 4
Size [ml]:	50
Temperature range [°C]:	-60 – +100
Tensile shear strength [N/mm²] (Alu-Alu; DIN EN 1465):	>13
Tensile shear strength [N/mm²] (Steel-Steel; DIN EN 1465):	>20
Tensile strenght [N/mm²] (DIN 53504):	~46
Viscosity [mPas]:	(Mischung / Mix), 8000 - 11000

technical data sheet

instruction manual

Zubehör-Artikel

Quadromixer MBQ05-16L for MR 1:1 / 2:1

Quadromixer with bayonet connection and Slip Luer tip for B-system cartridges and S-system cartridges. Dispensing needles can be attached directly to the Slip Luer tip. This static mixer is suitable for 25 ml - 50 ml double cartridges with a mixing ratio of 1:1 or 2:1.

Art.-Nr.: MBQ05-16L

Available immediately

From €0.83

Handdosiersystem SDV50 für 50 ml Doppelkartuschen im Mischungsverhältnis 1:1

Hand dispensing system 2-comp 50ml 1:1 mixing ratio

The SDV50 2-component manual dispensing system allows easy dispensing of 2-component materials directly from the 50ml cartridges using our time-pressure dispensers. This offers the advantage that the control can be much more precise and easier than with conventional dispensing guns. The SDV50 2-component manual dispensing system in the standard version is compatible with 2-component 50ml cartridges of system A and system B / cartridges with bayonet connection. The hand dispensing system SDV50 is easily equipped with the 2-component syringe barrel (see also our application video) and connected to the compressed air outlet of the dispenser. By pressing the foot pedal, the dispensing process is triggered: either in manual mode (material is dispensed as long as you hold down the footswitch), or timed (one time triggering the foot pedal - the dispensing unit dispense as long as the time you set). Due to the compact design, the hand dispensing system SDV50 can be easily guided by hand. Alternatively, the SDV50 manual dispensing system can be mounted on a stand: in this case, you simply move your workpiece under the mixing tube. For a syringe barrel change, the pistons must be pulled back out of the syringe barrel. This is done by means of the vacuum regulator of the dispenser: open the vacuum regulator completely and the pistons are pulled out of the syringe barrel. Then the cartridge holder can be removed laterally to insert a new syringe barrel. Additional available cartridge holders: system B system S / dental system (UHU double cartridge)

Art.-Nr.: GGA-SDV50-1-1

Available immediately

€299.00

MAN GUN 2-comp 50ml MR 1:1 / 2:1, 4:1, 10:1

Small, light in weight, manual dispensing gun for 2-component materials in 50ml cartridges.With a good transmission this gun is suitable for low to middle viscosity materials. Different mixing ratios can be achieved by easy changing of the plunger. For cartridge size: 50 mlMixing Ratio: 1:1 / 2:1 or 4:1 or 10:1Weigth: 200 gLenght: 180 mm Note: NOT suitable for 2-component cartridges of the type “S-system“ (e.g. UHU-Plus)!

Art.-Nr.: MAN50M

Available immediately

From €34.50