2-K-DOS Dispensing System Overview

2 component mixing and dispensing device 2-K-DOS Touch with 4 liter tanks and 2 meter material hose for Wacker SilGel612 The 2-K-DOS Touch mixing and dosing device from Giebler mixes and doses 2-component casting compounds and adhesives based on polyurethane, epoxy and silicone quickly and precisely. High-resolution adjustable values for the mixing ratio, delivery rate and dosing quantity ensure precise mixing and dosing at all times. The appliance mixes the mixture precisely at all times, without air bubbles and in the correct quantity. The two components are conveyed from the storage containers integrated in the appliance via a computer-controlled flexible hose to the dosing head, where they are mixed with an easily replaceable static mixer. With the different variants that can be created thanks to the modular design and the different interfaces for a wide range of additional devices, the device can be used to solve a wide variety of potting tasks. This dispensing system has been configured for dispensing Wacker SilGel 612 material. The system is therefore set for a mixing ratio of 1:1. The dispensing system is also equipped with a 2-meter-long material hose to the dispensing head, which allows sufficient leeway for installation on our dosing robots. The recommended mixer for this application is the MCH06-24T.Special functions:Menu-controlled and password-protected operation with 7'' touch panelFill level control Pot life alarm with automatic rinsing of the mixing tube Storage of up to 99 different mixing and dosing programmes Analogue and digital interfaces for integrating the appliance into automatic production systems Fields of application: Potting of electronic assemblies and components Sealing of parting lines Application of sealing and adhesive beads and coatings Potting LED strips Advantages over manual mixing: Immediate availability of the mixture at any time Air bubble-free mixing and dosing Reliable mixing and dosing Simple programming of the mixing and dosing programmes: Mixing ratio, delivery speed and delivery rate Rapid amortisation due to significant time savings Variants and accessories: Different storage containers Different lengths of dosing hose Agitator for sedimenting potting compounds Vacuum for degassing the potting compounds Heater for heating the potting compounds Drying of the air in the containers with drying cartridge or nitrogen Potting documentation Additional equipment: Coordinate table ROBO-DOS for automatic potting LIN-DOS SW three-axis linear unit for potting LED strips Controlled heating of the potting compound with THERMO-DOS HOBBO-DOS and LOAD-DOS loading devices for automatic filling of containers from Hobboks or 200 litre drums Weighing scales

Potting Machine ROBO-DOS Together with the 2-K-DOS mixing and dispensing system, the ROBO-DOS three-axis coordinate table forms a robot system for the fully automatic potting of assemblies and parts such as electronic assemblies, sensors, sealing tracks and coatings.The components can be potted at one point or with a track. They can be arranged several times on a pallet and then automatically potted one after the other by the device.Operation is menu-driven and password-protected using a touch panel. The potting tracks of parts can be programmed and saved. The travel and shot quantity can be monitored using additional equipment.Each device is adapted to the specific needs of our customers.Special functions: Moving in three coordinates simultaneously Moving circular arcs Saving of 20 traverse paths, saving and loading to and from PC Fields of application: Fully automatic potting of electronic assemblies and sensors Application of sealing, adhesive traces and coatings Production of parts with potting molds Potting LED strips Variants: Different sizes of active area, standard from 40×30 cm to 100×60 cm and larger Clearance height 115 mm or greater Table-top unit for standard sizes, free-standing unit for large areas Additional equipment: Holder and control unit for 1 or 2 dispensing heads

2 component mixing and dispensing device 2-K-MICRO-DOS The 2-K-MICRO-DOS mixing and dispensing system from Giebler mixes and doses 2-component polyurethane, epoxy and silicone-based potting compounds quickly and accurately in very small quantities, in the order of 10 mg. High-resolution adjustable values for the mixing ratio, delivery rate and dosing quantity ensure precise mixing and dosing at all times. The appliance mixes the mixture precisely at all times, without air bubbles and in the correct quantity. The two components are conveyed from the storage containers integrated in the appliance via a computer-controlled flexible hose to the dosing head, where they are mixed with an easily replaceable static mixer. With the different variants that can be created thanks to the modular design and the different interfaces for a wide range of additional devices, the device can be used to solve a wide variety of potting tasks. Each compact tabletop device is customised to the specific needs of our customers. Special functions:Menu-controlled and password-protected operation with touch panelFill level controlPot life alarm with automatic rinsing of the mixing tubeStorage of up to 99 different mixing and dosing programmesAnalogue and digital interfaces for integrating the appliance into automatic production systemsFields of application: Potting and bonding of small partsSealing joints and gapsApplying sealing strips and adhesive dots Advantages over manual mixing:Immediate availability of the mixture at any timeAir bubble-free mixing and dosingPrecise mixing and dispensing of very small quantities Simple programming of the mixing and dosing programmes: Mixing ratio, delivery speed and delivery rate Rapid amortisation due to significant time savings Variants and accessories: Different cartridges as storage containers (LuerLock cartridge, SEMCO cartridge, EURO cartridge) Potting documentation Additional equipment: Coordinate table ROBO-DOS for automatic potting LIN-DOS SW three-axis linear unit for potting LED strips