Series production and filling

-) Can my material be applied in small quantities and repeatable?-) Can I dose it directly from the original container?-) Can my material be permanently exposed to compressed air or does it harden when exposed to air??-) How long can it be stored in cartridges or pressure tanks?-) Does it harden in the dispensing tips?-) Does it drip after dispensing? Does it pull strings? ... these are all questions that arise when using a new material. During a material test, we check the dispensing behaviour of your material with the appropriate dispensing technology. The costs depend on the customer requirements. The minimum cost is € 300,00. Your advantages after a material test: if the material can be dispensed with compressed air if the material can be dispensed directly from the original cartridge or must be transferred before if it has to be heated before dispensing how to prevent delay-yield or cob-webbing how long the material needs to cure on the workpiece how long it can be stored in the dispensing cartridge which "dispensing technology" is necessary for this (complete solution including all necessary fastening parts and brackets as well as tubing) which consumables will be used in the dispensing process you can calculate your costs in advance you know all settings regarding pressure, travel speed, tip diameter, cartridge size you can determine the cycle times and the productivity of the automated process   For a test setup we need: the material to be dispensed in the original cartridge (possibly in advance a technical data sheet) some workpiece samples description/sketch, where and how much material should be dispensed some general informations about the planned process: how many workpieces should be loaded per workday with the material? which cycle time should be reached? how much material will be needed per workpiece? is it already done by hand? Application in the industry: semiconductor PCB-components socketing and bonding LCD-bonding electrical components (such as relays, speakers, batteries) automotive clothing medicine optics used materials: fats silicones 2k-bondings solder pastes conductive adhesives uv-adhesives epoxy resins sealants other liquid materials