The SDV50 2-component manual dispensing system allows easy dispensing of 2-component materials directly from the 50ml cartridges using our time-pressure dispensers. This offers the advantage that the control can be much more precise and easier than with conventional dispensing guns. The SDV50 2-component manual dispensing system in the standard version is compatible with 2-component 50ml cartridges of system A and system B / cartridges with bayonet connection. The hand dispensing system SDV50 is easily equipped with the 2-component syringe barrel (see also our application video) and connected to the compressed air outlet of the dispenser. By pressing the foot pedal, the dispensing process is triggered: either in manual mode (material is dispensed as long as you hold down the footswitch), or timed (one time triggering the foot pedal - the dispensing unit dispense as long as the time you set). Due to the compact design, the hand dispensing system SDV50 can be easily guided by hand. Alternatively, the SDV50 manual dispensing system can be mounted on a stand: in this case, you simply move your workpiece under the mixing tube. For a syringe barrel change, the pistons must be pulled back out of the syringe barrel. This is done by means of the vacuum regulator of the dispenser: open the vacuum regulator completely and the pistons are pulled out of the syringe barrel. Then the cartridge holder can be removed laterally to insert a new syringe barrel. Additional available cartridge holders: system B system S / dental system (UHU double cartridge)

The SDV50 2-component manual dispensing system allows easy dispensing of 2-component materials directly from the 50ml cartridges using our time-pressure dispensers. This offers the advantage that the control can be much more precise and easier than with conventional dispensing guns. The SDV50 2-component manual dispensing system in the standard version is compatible with 2-component 50ml cartridges of system A and system B / cartridges with bayonet connection. The hand dispensing system SDV50 is easily equipped with the 2-component syringe barrel (see also our application video) and connected to the compressed air outlet of the dispenser. By pressing the foot pedal, the dispensing process is triggered: either in manual mode (material is dispensed as long as you hold down the footswitch), or timed (one time triggering the foot pedal - the dispensing unit dispense as long as the time you set). Due to the compact design, the hand dispensing system SDV50 can be easily guided by hand. Alternatively, the SDV50 manual dispensing system can be mounted on a stand: in this case, you simply move your workpiece under the mixing tube. For a syringe barrel change, the pistons must be pulled back out of the syringe barrel. This is done by means of the vacuum regulator of the dispenser: open the vacuum regulator completely and the pistons are pulled out of the syringe barrel. Then the cartridge holder can be removed laterally to insert a new syringe barrel. Additional available cartridge holders: system B

The SDV50 2-component manual dispensing system allows easy dispensing of 2-component materials directly from the 50ml cartridges using our time-pressure dispensers. This offers the advantage that the control can be much more precise and easier than with conventional dispensing guns. The SDV50 2-component manual dispensing system is available in the standard version for 2-component 50ml cartridges of system A / cartridges with bayonet connection. The hand dispensing system SDV50 is easily equipped with the 2-component syringe barrel (see also our application video) and connected to the compressed air outlet of the dispenser. By pressing the foot pedal, the dispensing process is triggered: either in manual mode (material is dispensed as long as you hold down the footswitch), or timed (one time triggering the foot pedal - the dispensing unit dispense as long as the time you set). Due to the compact design, the hand dispensing system SDV50 can be easily guided by hand. Alternatively, the SDV50 manual dispensing system can be mounted on a stand: in this case, you simply move your workpiece under the mixing tube. For a syringe barrel change, the pistons must be pulled back out of the syringe barrel. This is done by means of the vacuum regulator of the dispenser: open the vacuum regulator completely and the pistons are pulled out of the syringe barrel. Then the cartridge holder can be removed laterally to insert a new syringe barrel.

The SDV50 2-component manual dispensing system allows easy dispensing of 2-component materials directly from the 50ml cartridges using our time-pressure dispensers. This offers the advantage that the control can be much more precise and easier than with conventional dispensing guns. The SDV50 2-component manual dispensing system is available in the standard version for 2-component 50ml cartridges of system S / cartridges with bayonet connection. The hand dispensing system SDV50 is easily equipped with the 2-component syringe barrel (see also our application video) and connected to the compressed air outlet of the dispenser. By pressing the foot pedal, the dispensing process is triggered: either in manual mode (material is dispensed as long as you hold down the footswitch), or timed (one time triggering the foot pedal - the dispensing unit dispense as long as the time you set). Due to the compact design, the hand dispensing system SDV50 can be easily guided by hand. Alternatively, the SDV50 manual dispensing system can be mounted on a stand: in this case, you simply move your workpiece under the mixing tube. For a syringe barrel change, the pistons must be pulled back out of the syringe barrel. This is done by means of the vacuum regulator of the dispenser: open the vacuum regulator completely and the pistons are pulled out of the syringe barrel. Then the cartridge holder can be removed laterally to insert a new syringe barrel. Additional available cartridge holders: system B

Demonstration devices with slight signs of wear and external paint damage at an absolute top price! Prices and availability on request Analogue or manually controlled dispenser IG-FU810 Output pressure 0,1 - 1 Bar Automatic dispensing takes place via the analogue setting of time domain by using a control dial (in the range between 0,01 to 8 seconds). Alternatively, the device can be operated manually with one keystroke. Dispensing takes place as long as the foot pedal or the finger switch is pressed. The dispenser is equipped with a vacuum retention system to prevent delay yield of low-viscosity media. In the sale price included accessories allow easy connection to the compressed air network and the immediate start of dispensing work. The device is ready for use in a few steps and works maintenance-free. For special applications concerning dispensing material, output quantity etc. we can offer you extensive accessories like, dispensing tips, syringe barrels, pistons – plungers etc. You can ask for guidance for dispensing your special material by contacting us: office@dosieren.net   Characteristics of the IG-FU810: 2 operating modes: manually / analogue time - controlled controlled via foot pedal or finger switch (both included) microprocessor controlled 2 years warranty time conveniently adjustable via control dial wide range of application dropping prevention with vacuum suck-back retention economic system with high reliability Applications for IG-FU810 0,1 - 1 bar: low to high viscosity materials: cyanoacrylates solder paste adhesives uv-adhesives oils and many more Optionally, the following accessories can be ordered: adapter for 3, 5, or 10cc syringe barrels (with hose in desired lenght) fingerswitch "Easy Touch" - adjustable by Velcro for all syringe barrels sizes (3, 5, 10, 30 and 55 cc) - eIG-8101000HS-MS filter for syringe barrels adapter (prevents reflux of low-viscosity materials in the dispensing device) - e560034 Further details can be found in our operating instruction (PDF).

Analogue or manually controlled dispenser IG-1113D Output pressure 0,1 - 7 Bar With our dispenser IG-1113D, automatic dispensing is carried out via the analog setting of the time rangebetween 0.01 and 8 seconds.Alternatively, the unit can be switched to manual mode at the touch of a button.Dispensing continues as long as the foot pedal or the finger switch is actuated.To avoid dripping of low-viscosity media, the dispenser is equipped with a vacuum retention system.It is ready for operation in just a few steps and works maintenance-free.The accessories included in the sales price allow easy connection to the compressed air network and immediate start of a dispensing job.   Characteristics of the IG-1113D: 2 operating modes: manually / analogue time - controlled Controlled via foot pedal or finger switch (both included) Microprocessor controlled Time conveniently adjustable via control dial Wide range of application Dropping prevention with vacuum suck-back retention Economic system with high reliability 2 years warranty Applications for IG-1113D 0,1 - 7 barlow to high viscosity materials (single and multi component): Cyanoacrylates Silikones Solder paste Adhesives Greases UV-adhesives Oils Casting compound and many more Optionally, the following accessories can be ordered: adapter for 3, 5, or 10cc syringe barrels (with hose in desired lenght) fingerswitch "Easy Touch" - adjustable by Velcro for all syringe barrels sizes (3, 5, 10, 30 and 55 cc) - IG-8101000HS-MS filter for syringe barrels adapter (prevents reflux of low-viscosity materials in the dispensing device) - 560034

Digital or manual controlled dispenser IG-1500D, Air-out: 0,1 - 7 bar(Successor to our IG-FU1000T) With our dispenser IG-1500D, automatic dispensing is carried out via the digital setting of the time range between 0.001 and 99.99 seconds. Alternatively, the unit can be operated manually with the time setting "0000".Dispensing continues as long as the foot pedal or the finger switch is actuated.To avoid dripping of low-viscosity media, the dispenser is equipped with a vacuum retention system.It is ready for operation in just a few steps and works maintenance-free.The accessories included in the sales price allow easy connection to the compressed air network and immediate start of a dispensing job.   Characteristics of the IG-1500D: 2 operating modes: manually / digitally time - controlled Controlled via foot pedal or finger switch (both included) Microprocessor controlled Automatic timer memory Timer with 4-digit digital display Wide range of application Dropping prevention with vacuum suck-back retention 2 years warranty Applications for IG-1500D 0,1 - 7 bar: low to high viscosity materials (single and multi component): Cyanoacrylates Silikones Solder paste Adhesives Greases UV-adhesives Oils Casting compound and many more Optionally, the following accessories can be ordered: adapter for 3, 5, or 10cc syringe barrels (with hose in desired lenght) finger switch "Easy Touch" - adjustable by Velcro for all syringe barrels sizes (3, 5, 10, 30 and 55 cc) - IG-8101000HS-MS filter for syringe barrels adapter (prevents reflux of low-viscosity materials in the dispensing device) - 560034

Analogue or manually controlled dispenser IG-1113D Output pressure 0,1 - 1 Bar In contrast to the 0-7 bar device, the 0-1 bar device is better suited for low viscosity materials,as the pressure range can be adjusted more precisely. With our dispenser IG-1113D, automatic dispensing is carried out via the analog setting of the time rangebetween 0.01 and 8 seconds.Alternatively, the unit can be switched to manual mode at the touch of a button.Dispensing continues as long as the foot pedal or the finger switch is actuated.To avoid dripping of low-viscosity media, the dispenser is equipped with a vacuum retention system.It is ready for operation in just a few steps and works maintenance-free.The accessories included in the sales price allow easy connection to the compressed air network and immediate start of a dispensing job.   Characteristics of the IG-1113D: 2 operating modes: manually / analogue time - controlled Controlled via foot pedal or finger switch (both included) Microprocessor controlled Time conveniently adjustable via control dial Wide range of application Dropping prevention with vacuum suck-back retention Economic system with high reliability 2 years warranty Applications for IG-1113D 0,1 - 1 barlow to medium viscosity materials (single and multi component): Cyanoacrylates Anaerobic glue SMD glue UV-adhesives Oils and many more Optionally, the following accessories can be ordered: adapter for 3, 5, or 10cc syringe barrels (with hose in desired lenght) fingerswitch "Easy Touch" - adjustable by Velcro for all syringe barrels sizes (3, 5, 10, 30 and 55 cc) - IG-8101000HS-MS filter for syringe barrels adapter (prevents reflux of low-viscosity materials in the dispensing device) - 560034

Digital or manual controlled dispenser IG-101D, Air-out: 0,1 - 7 bar(Successor to our SL101N) With our dispenser IG-101D, automatic dispensing is carried out via the digital setting in TIMER mode with a rangebetween 0.001 and 9999 seconds.Alternatively, the unit can operated in manual mode by pressing the button PURGE.Dispensing continues as long as the foot pedal or the finger switch is actuated. In addition, the dispenser can be operated in circulation mode. In this mode, it is possible to set a pause time between the dispensing processes.To avoid dripping of low-viscosity media, the dispenser is equipped with a vacuum retention system.It is ready for operation in just a few steps and works maintenance-free.The accessories included in the sales price allow easy connection to the compressed air network and immediate start of a dispensing job. Characteristics of the IG-101D: 3 operating modes: manually / digitally time / cycle function time - controlled Controlled via foot pedal or finger switch (both included) Microprocessor controlled Automatic timer memory Timer with 4-digit digital display Wide range of application Dropping prevention with vacuum suck-back retention Pressure gauge to set the dispensinig pressure 9 program slots for storing and calling up dispensing times for time and automatic cycle 2 years warranty Applications for IG-101D low to high viscosity materials (single and multi component): Cyanoacrylates Silikones Solder paste Adhesives Greases UV-adhesives Oils Casting compound and many more Optionally, the following accessories can be ordered: adapter for 3, 5, or 10cc syringe barrels (with hose in desired lenght) finger switch "Easy Touch" - adjustable by Velcro for all syringe barrels sizes (3, 5, 10, 30 and 55 cc) - IG-8101000HS-MS filter for syringe barrels adapter (prevents reflux of low-viscosity materials in the dispensing device) - 560034

Digital or manual controlled dispenser IG-1500D, Air-out: 0,1 - 1 bar(Successor to our IG-FU1000T) In contrast to the 0-7 bar device, the 0-1 bar device is better suited for low viscosity materials, as the pressure range can be adjusted more precisely. With our dispenser IG-1500D, automatic dispensing is carried out via the digital setting of the time range between 0.001 and 99.99 seconds. Alternatively, the unit can be operated manually with the time setting "0000".Dispensing continues as long as the foot pedal or the finger switch is actuated.To avoid dripping of low-viscosity media, the dispenser is equipped with a vacuum retention system.It is ready for operation in just a few steps and works maintenance-free.The accessories included in the sales price allow easy connection to the compressed air network and immediate start of a dispensing job.   Characteristics of the IG-1500D: 2 operating modes: manually / digitally time - controlled Controlled via foot pedal or finger switch (both included) Microprocessor controlled Automatic timer memory Timer with 4-digit digital display Wide range of application Dropping prevention with vacuum suck-back retention 2 years warranty Applications for IG-1500D 0,1 - 1 bar: low to medium viscosity materials (single and multi component): Cyanoacrylates Anaerobic glue SMD glue UV-adhesives Oils and many more Optionally, the following accessories can be ordered: adapter for 3, 5, or 10cc syringe barrels (with hose in desired lenght) finger switch "Easy Touch" - adjustable by Velcro for all syringe barrels sizes (3, 5, 10, 30 and 55 cc) - IG-8101000HS-MS filter for syringe barrels adapter (prevents reflux of low-viscosity materials in the dispensing device) - 560034

Digital or manual controlled dispenser IG-101D, Air-out: 0,1 - 1 bar(Successor to our SL101N) In contrast to the 0-7 bar device, the 0-1 bar device is better suited for low viscosity materials, as the pressure range can be adjusted more precisely. With our dispenser IG-101D, automatic dispensing is carried out via the digital setting in TIMER mode with a rangebetween 0.001 and 9999 seconds.Alternatively, the unit can operated in manual mode by pressing the button PURGE.Dispensing continues as long as the foot pedal or the finger switch is actuated. In addition, the dispenser can be operated in circulation mode. In this mode, it is possible to set a pause time between the dispensing processes.To avoid dripping of low-viscosity media, the dispenser is equipped with a vacuum retention system.It is ready for operation in just a few steps and works maintenance-free.The accessories included in the sales price allow easy connection to the compressed air network and immediate start of a dispensing job. Characteristics of the IG-101D: 3 operating modes: manually / digitally time / cycle function time - controlled Controlled via foot pedal or finger switch (both included) Microprocessor controlled Automatic timer memory Timer with 4-digit digital display Wide range of application Dropping prevention with vacuum suck-back retention Pressure gauge to set the dispensinig pressure 9 program slots for storing and calling up dispensing times for time and automatic cycle 2 years warranty Applications for IG-101D 0,1 - 1 bar low to medium viscosity materials (single and multi component): Cyanoacrylates Anaerobic glue SMD glue UV-adhesives Oils and many more Optionally, the following accessories can be ordered: adapter for 3, 5, or 10cc syringe barrels (with hose in desired lenght) finger switch "Easy Touch" - adjustable by Velcro for all syringe barrels sizes (3, 5, 10, 30 and 55 cc) - IG-8101000HS-MS filter for syringe barrels adapter (prevents reflux of low-viscosity materials in the dispensing device) - 560034

Peristaltic pump The peristaltic pump IG-FU800 is suitable for dispensing work in places where no compressed air is available. Low-viscosity media (viscosity below 10,000 CPS) Cyanoacrylates or UV-acrylates can be metered very precisely and in very small increments by the peristaltic pump principle. For this purpose, a rotation number and -speed is adjusted to match the medium to be dispensed.With optimally set rotational number and -speed, the same amount of material can be continuously dispensed.After the dispensing cycle, an optional automatic material retraction (= short rotation in the opposite direction) can be set to prevent dripping of the dispensing material.Further advantage of this peristaltic pump is that you can suck the material to be dispensed directly from the original container (bottle, can, glass). Therefore, the risk of contamination of the employee or the pollution of the workplace is largely avoided because the material no longer needs to be repackaged or refilled. The medium to be dispensed does not come into contact with the system itself, which makes it maintenance free. After completion of the work, the hose can be cleaned out by reversing the pumping direction. The hand pen with release button is included in the delivery. The hose is not included in the delivery, because it is designed according to your application. Likewise, in some applications it is necessary to supply the dispensing material with low pre-pressure. We are glad to provide the necessary solutions for you! !! Contact us in this regard - we are glad to help you with the selection of suitable accessories !! Characteristics: Dispensing without compressed air Definable material retraction to prevent dripping Dispense manually or by setting the number of revolutions and speed Digital display of the rotation angle and speed Dispense directly from the original container Adjustable rotor speed Finger switch on the dispensing pen Further details can be found in our operating instruction (PDF).