Conditioner yellow 30cc

GONANO Dosiertechnik

Gelber Conidtioner in einer 30cc LuerLock Kartusche mit Kolben und vorderem Verschluss, wir zum Spülen der Dosierventile verwendet

€9.30* / piece

Quantity

Unit price

From 1

€9.30

From 10

-3.2 %

€9.00

Available immediately

Request an offer for this product.

Request offer

Product number: GV990223-30

Mindestbestellmenge: 1

Product information "Conditioner yellow 30cc"

The conditioner is suitable for cleaning of our dispensing valves.

After use but before disassembling, the dispensing valve should be "flushed" with the conditioner. This provides a basic cleaning, where the remains of your dispensing material are discharged.
The conditioner is Vaseline-based and is suitable for all our valves.

Zubehör-Artikel

Needle valve, Stainless Steel

The needle valve is suitable for dispensing of low to medium viscosity materials. It enables to apply even extremely small individual shots of material. The valve opens with the control air (min. 5bar). Usually the valve closes with spring force when the controll air is off. Optionally auxiliary air can be used for faster closure. Of course the flow rate of the material depends on the viscosity rate of the material and the pre-pressure of the material but it can be easily adjusted over the rotating wheel on the valve. Our dispensers can be used as compressed air controls. In order to be able to remove coarse remnants of the dispensing material from the valve, we recommend our conditioner. The valve body is made from high quality Stainless Steel! Technical details: material inlet: 1/8" NPT thread material outlet: LuerLock male compressed air inlet: M5 thread weight: 210 g dimensions: lenght 115mm, Ø 28,5mm operating air pressure: min. 5 bar operating frequency: 600 cycles/min. flow rate (water at 100psi): 1.680 ml/min. fluid viscosity rate: up to 100.000 mPas fluid pressure: max. 20 bar

Art.-Nr.: GV-1425

Available immediately

€1,185.00

High pressure spool valve

Our high pressure spool valve is suitable to dispense high flow rates of medium to high viscosity materials. The reverse action closure of the valve provides a “suck-back” effect. The valve opens with the control air (min. 4bar). Usually the valve closes with spring force when the controll air is off. Optionally auxiliary air can be used for faster closure. Our dispensers can be used as compressed air controls. In order to be able to remove coarse remnants of the dispensing material from the valve, we recommend our conditioner. The valve body is made from high quality Stainless Steel! Previous article number: 790HPNM Technical details: material inlet: 1/4" NPT thread material outlet: 1/4" NPT thread control air inlet: 1/4" NPT thread weight: 520 g dimensions: 118mm lenght, Ø 38 mm operating pressure: 4 bar operation frequency: 600 Zyklen/min. flow rate (water at 100psi): 39.000 ml/min. fluid viscosity range: up to 3.000.000 mPas fluid pressure: max. 170 bar

Art.-Nr.: GV-1370

Available immediately

€665.00

Rückzugsventil aus Edelstahl mit LuerLock Anschluss für Dosiernadeln oder Fittings

Spool valve, Stainless Steel

Our Spool valve is suitable to dispense medium to high viscosity materials. The reverse action closure of the valve provides a “suck-back” effect, which is easily adjustable via a set screw on the valve. This is very helpful and prevents undesirable after-dropping of the material. The valve opens with the control air (min. 3,5bar). Usually the valve closes with spring force when the control air is off. Optionally auxiliary air can be used for faster closure. Our dispensers can be used as compressed air controls. In order to be able to remove coarse remnants of the dispensing material from the valve, we recommend our conditioner. The valve body is made from high quality Stainless Steel! Technical details: material inlet: 1/8" NPT thread material outlet: 1/8" NPT thread contlrol air inlet: M5 thread weight: 160 g dimensions: lenght 102mm, Ø 35 mm operating pressure: min. 3,5 bar operating frequency: 700 cycles/min. flow rate (water at 100psi): 2.700 mL/min. fluid viscosity range: up to 1.000.000 mPas fluid pressure: max. 34bar

Art.-Nr.: GV-1325

Available immediately

€999.00

Diaphragm valve, Stainless Steel

Our diaphragm dispensing valve is suitable to dispense low to medium viscosity materials. The wetted parts are separated from the valve control units. This is excellently well suited for dispensing aggressive or very low viscosity materials like paints, inks, cyanoacrylates or oils, especially when high frequency output cycles of small dosing quantities are required. The respective quantities can be exactly set via a fine adjustment on the head of the valve. Our dispensers can be used as compressed air controls. In order to be able to remove coarse remnants of the dispensing material from the valve, we recommend our conditioner. The valve body is made from high quality Stainless Steel! Technical details: material inlet: 1/8" NPT thread material outlet: LuerLock male control air inlet: M5 thread weight: 87 g dimensions: 80mm lenght, Ø 27 mm operating pressure: 4 bar operating frequency: 500 cycles/min. flow rate (water at 100psi): 300 mL/min. fluid viscosity range: up to 50.000 mPas fluid pressure: max. 5 bar

Art.-Nr.: GV-1625

Available immediately

€980.00

Syringe barrel adapter 30/55 cc black

This adapter does not fit syringe barrels with a round bottom. For syringe barrels with a round bottom, please use the green adapter IPI43055-GREEN! The cartridge adapter enables a quick and reliable connection of the LuerLock cartridge to the dispenser. For adapters with special lengths, please submit an enquiry with the desired hose length.

Art.-Nr.: IG-TEAE3055B-6.20M

Available immediately

From €20.03